Food and Water / Water Purification

How to Purify Water in an Emergency: Methods and Tools

Published

· Updated

Quick answer

  • Best method: bring clear water to a rolling boil for 1 minute. Boil for 3 minutes at high altitude.
  • No fuel? Add 8 drops of plain, unscented 6% bleach per gallon. Stir and wait 30 minutes.
  • Cloudy water: let it settle and filter it through a cloth first. Then double the bleach dose.
  • Never trust clear-looking water. Boiling and bleach can’t remove fuel or chemicals.

After a flood, storm or water main break, tap water and outdoor water can carry germs that make you sick. The CDC and EPA give simple, tested steps to make water safe. This guide uses their numbers.

Use bottled water first if you have it. Treat water only when you have no safe supply.

Step 1: Choose the cleanest water you can find

Your result depends on what you start with. Pick water in this order:

  1. Bottled water or water you stored before the emergency.
  2. Tap water during a “boil water” notice.
  3. Moving water from a stream or river.
  4. Still water from a pond or lake.

The EPA says not to use water with floating material, a dark color or a strange smell. Flowing water is generally better than stagnant water.

Step 2: Settle and pre-filter cloudy water

The EPA and CDC say bleach and UV light work less well in cloudy water. So clear the water before you treat it.

  1. Let the water stand in a clean bucket until the dirt sinks.
  2. Pour off the clear water on top, leaving the sludge behind.
  3. Pour it through a clean cloth, paper towel or coffee filter.
  4. Now treat it with one of the methods below.

Pre-filtering only removes dirt. It does not make the water safe to drink.

Method 1: Boiling

Boiling is a reliable choice when you have fuel. The CDC says it kills viruses, bacteria and parasites, including Giardia and Cryptosporidium.

How to boil water

  1. Pre-filter the water if it is cloudy.
  2. Bring it to a rolling boil. That means big bubbles that keep coming even when you stir.
  3. Keep it boiling for 1 minute.
  4. At high altitude, boil for 3 minutes. The CDC uses this rule above 6,500 feet (about 2,000 m). The EPA uses it above 5,000 feet (about 1,500 m).
  5. Let the water cool on its own. Store it in clean containers with tight lids.

If you live between 5,000 and 6,500 feet, boil for 3 minutes to be safe.

Boiled water can taste flat. The EPA suggests adding a pinch of salt per quart, or pouring the water back and forth between two clean containers.

Never cook on a camp stove or grill indoors. Fumes from these can kill you with carbon monoxide. See our guide to emergency cooking without power for safe setups.

Method 2: Unscented household bleach

Bleach works when you can’t boil. Use only regular, unscented chlorine bleach. Do not use scented or “color-safe” bleach, or bleach with added cleaners.

Check the label for the strength. The EPA table below covers the two common strengths, 6% and 8.25% sodium hypochlorite. The EPA also says to use fresh bleach, or bleach stored at room temperature for less than a year.

Bleach amounts (EPA)

Water amount 6% bleach 8.25% bleach
1 quart or 1 liter 2 drops 2 drops
1 gallon 8 drops 6 drops
2 gallons 16 drops (1/4 tsp) 12 drops (1/8 tsp)
4 gallons 1/3 tsp 1/4 tsp
8 gallons 2/3 tsp 1/2 tsp

The CDC gives a single rule for any bleach between 5% and 9%: 8 drops per gallon. If your bleach is 1%, the CDC says to use 40 drops per gallon.

How to use it

  1. Pre-filter cloudy water first.
  2. Add the bleach with a clean dropper.
  3. Double the dose if the water is cloudy, colored or very cold.
  4. Stir well.
  5. Wait 30 minutes.
  6. Smell the water. It should have a slight chlorine smell.
  7. No smell? Add the same dose again and wait another 15 minutes.

If the chlorine taste is too strong, pour the water between clean containers. Then let it stand for a few hours before drinking.

Keep a small dropper bottle taped to your bleach in your kit. Guessing with a cap or spoon is how people get the dose wrong.

Method 3: Tablets and iodine

Water treatment tablets are light and easy to carry. They may contain chlorine, iodine or chlorine dioxide. Strengths differ by brand, so follow the label exactly, including the wait time.

The type matters. Here is what the CDC says about each:

  • Chlorine dioxide tablets kill Giardia and are somewhat effective against Cryptosporidium. That makes them the best tablet choice. The CDC still advises filtering first.
  • Chlorine and iodine tablets kill bacteria and viruses. They do not work well against parasites like Cryptosporidium.
  • Iodine should be avoided if you are pregnant, have thyroid problems or are sensitive to iodine. The CDC says no one should drink iodine-treated water for more than a few weeks at a time.

The EPA gives a dose for 2% tincture of iodine from a first aid kit. Use 5 drops per quart or liter, or 10 drops if the water is cloudy. Stir and wait at least 30 minutes.

Method 4: Portable water filters

Hand pumps, squeeze filters, straw filters and gravity bags are popular for camping and kits. They remove germs by size. The CDC says to look at the absolute pore size, not the “average” or “nominal” size.

Filter rating What it removes
Absolute 1 micron or smaller Parasites such as Giardia and Cryptosporidium
NSF Standard 53 or 58 for “cyst reduction” or “cyst removal” Parasites
Absolute 0.3 micron or smaller Parasites and bacteria
Reverse osmosis Parasites, bacteria and viruses

Most portable filters do not remove viruses. The CDC advises adding a disinfectant after filtering, such as chlorine dioxide or bleach.

Check the label for the exact NSF certification and what it covers. Replace or clean the filter element as the maker says. A clogged or cracked filter can let germs through.

Method 5: UV light pens

UV pens and UV bottle caps zap germs with ultraviolet light. The CDC says portable UV units can kill parasites, bacteria and viruses in small amounts of clear water.

  1. Pre-filter the water until it is clear. Cloudy water blocks the light.
  2. Follow the device’s directions for water amount and treatment time.
  3. Carry spare batteries or a charging method.

A UV pen does nothing if its battery is dead. Keep bleach or tablets as a backup.

Method 6: Distillation

Distillation catches the steam from boiling water and lets it drip back into a cup. Ready.gov notes it removes germs, heavy metals, salts and most other chemicals.

Ready.gov’s simple setup:

  1. Fill a pot halfway with water.
  2. Tie a cup to the pot lid’s handle so the cup hangs right side up when the lid is upside down.
  3. Make sure the cup is not touching the water.
  4. Boil for 20 minutes. The water that drips into the cup is distilled.

It is slow and uses a lot of fuel. Use it when salt or chemicals are the concern and you have no other option.

Compare the methods

Method Kills bacteria and viruses Kills Cryptosporidium Removes chemicals Needs
Boiling Yes Yes No Fuel, pot
Unscented bleach Yes Not well No Bleach, dropper, 30 min
Chlorine dioxide tablets Yes Somewhat. Filter first No Tablets, label wait time
Iodine or chlorine tablets Yes No No Tablets
Filter (1 micron or smaller) Bacteria only at 0.3 micron or smaller. Not viruses Yes No Filter, then disinfect
UV pen Yes, in clear water Yes, in clear water No Batteries, clear water
Distillation Yes Yes Most Lots of fuel, time

For the best result, combine two methods. Filter first, then boil or disinfect.

What not to rely on

  • Clear-looking water. Germs are invisible. A clear mountain stream can still make you sick.
  • A homemade sand-and-charcoal filter alone. It can clear dirt, but it is not a tested way to kill germs. Always boil or disinfect after.
  • Boiling chemically polluted water. The CDC says boiling and disinfecting cannot make water safe if it contains fuel, toxic chemicals or radioactive material.
  • Flood water. It often carries sewage and chemicals. Use bottled water and ask your local health department.
  • Old or scented bleach. It may be too weak or have additives.

If you suspect chemicals, find another water source. Contact your local health department for advice.

Store treated water safely

  • Use clean, food-grade containers with tight lids.
  • Wash containers with dish soap first. Then sanitize them with 1 teaspoon of unscented bleach in 1 quart of water, as Ready.gov advises.
  • Label each container with the date.
  • Replace water you stored yourself every 6 months, per Ready.gov.
  • Keep commercially bottled water sealed in a cool, dark place.

Ready.gov advises storing at least 1 gallon (3.8 L) per person per day. You may need more in hot weather. Add water for pets too.

Water purification kit checklist

Add these to your basic survival kit. If you hike or camp, read our wilderness survival skills guide as well.

Sources

Surviving Disasters
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.